en:infrastruktura_ulozist

Data Storage Infrastructure

The data storage utilizes distributed and hierarchical model. Distributed model is represented by geographically split data centers located in Pilsen, Jihlava and Brno respectively. This model has an advantage of higher resistibility against data losses caused by media failures, natural disaster or by user or administrator mistake. Another advantage could be the possibility of using the closest data center, which provide faster communication.

Hierarchical model (type HSM - Hierarchical Storage Management) lies in, that rarely used data are migrated to the cheaper media with higher capacity, mostly tapes. By this way is possible to achieve, with limited budget, distinctly higher capacities compare to the disk only storage. In the other hand the data which are used often will be stored in fast media (cache, fast disks), so they will be accessible in short time.

Data centers


Jihlava

Tier 1 consists from two single disk arrays DCS3700 with 342 pcs of 3 TiB SAS disks. The disks are splitted into 32x (8+2) + 2x (6+2) RAID6 groups. Six disks are configured such a spare disks. Total net capacity of Tier1 array is 804 TiB. Tier 2 consists on the one hand from 7 pcs of MAID arrays Promise Vess R2600fiD and on the second hand from the tape library IBM TS3500. In the MAID arrays is in total installed 734 pcs of 4 TiB disks. Those disks are splitted into 41 groups of RAID6 (16+2). There are 4 disks used as a spare disks in each disk array. In total is thus available 648 data disks with net capacity 2496 TiB. Tape library TS3500 has capacity 3744 TiB.

Datacenter pictures


Brno

Tier 1 consists of two disk arrays DCS3700 with 4 TiB capacity. Tier 2 consists on one hand of 3 pcs of MAID array Proware EP-4643S and on the second hand of tape library IBM TS3500. Usable capacity of MAID arrays is 2116 TiB and 3520 TiB in case of tape library.

Datacenter pictures

Poslední úprava: 16.07.2019 13:21